Hop - Ups
Hardware & Accessories
XF-I605 XB2/XT2 Ackermann Plates (3 sets)
Quantity in Stock:11
This X Factory Infinity part contains 3 sets of Ackerman Plates for your X Ray XB2 or XT2 racing vehicles. The three sets are designated by the number of "slots" cut into the bottom edge of the steering arm.
The "2 slot" set is a direct replacement for the stock steering plates included in the X Ray kits (part #322292) and offers the least aggressive, smoothest steering response. This is great on high traction and higher speed layouts with fast flowing corners.
The "1 slot" set moves the outer steering tie rod ballstud out by 2mm each, giving more steering angle on the outside tire and a more aggressive steering response.
Finally, the "0 slot" ackerman plate set moves the ballstud out even more, increasing the aggressiveness further. This ackerman setting is recommended for the tightest, most technical tracks, or layouts with a lot of 180 degree corners.
Each set moves the outer steering tie-rod ballstud by 2mm per side.
Complete Set of all 3 ackermann plates you need to tune your X Ray car's steering response.
Each set is marked by the number of "grooves" cut in the trailing edge:
2 grooves - stock set, least aggressive, smoothest steering
1 groove - middle set
0 groves - most aggressive steering response
XF-I604 XB2 Rear Tower, CF, Dirt
XF-I608 XB2/XT2 Front Chassis Braces (2/pkg)
XF-I607 XB2/XT2 Battery Strap, CF, Short
XF-I602 XB2 Front Tower, CF
XF-I603 XB2 Rear Tower, CF, Carpet
Share your knowledge of this product.
Be the first to write a review »
Nav Menu 2
Site Help / FAQ
Terms & Conditions
Shipping & Deliveries
Returns & Exchanges
Call Us: (419) 887-1787
X Factory RC. All Rights Reserved.
Powered with Volusion