 |
||
| X - 6², X - 60, & SCX-60 Upgrades | ||
| Rear Camber Link Mod "On a few tracks I noticed that I had a little push on power and the rear was rolling a little. I wanted to shorten the rear camber link, but I also really wanted to keep the ability to raise and lower the height of the ballstud. And here it is, looking awesome too! We let the rest of the Team have sets and asked if they thought it worked. The resounding answer was "YES! " Most of us run them all the time now. They give the X - 6 more steering while at the same time allowing the rear to square up faster from the turn and therefore produce more drive...can it get any better?!?!" ~E. Stafford  |
||
| # ES 001 Camber Link X - 6 | $19.99 |
|
| Aluminum Motor Plate Brace "Having run the car a few times I noticed that the screw was working loose due to the plastic compressing and then springing back. There was some unwanted flex going on with the part…so out came the drawing package!! Having spoken to the rest of the team the result was the metal brace seen here: stronger in flex, the threads from the bottom won't strip out, and of course looks super cool in the blue!!" ~E. Stafford  |
||
| # ES 002 Motor Support X - 6 | $14.99 |
Backorder |
| Heatsink and Fan Mount "This part looks ace, and on a really hot day it's the sort of thing that's handy to have in the box. We've found the fan can lower motor temps by 8 to 10 °C " ~E. Stafford  |
||
| # ES 008 Heatsink and Fan Mount, with 25mm fan | $34.99 |
|
| #9200 Fan, 25mm, 10cm wire | $9.99 |
Backorder |
| Motor Plate "This thing just looks ace!" ~E. Stafford  |
||
| # ES 009 Motor Plate | $29.99 |
|
| Please note: shipping one item costs $7.50 US, $27.00 International. Maximum freight charges are $8.75 US, $31.50 International. |
||
| X - 5 Upgrades | ||
Steering Rack for the X - 5 and XX4 With the rack on the car responds much better to steering inputs and is more neutral throughout the whole turn. Turn in is increased slightly but mid corner steering and exit steering are increased a lot which is one area the car used to lack a little....you can now power the car from the turn and carry more speed with it. You'll need to put an extra washer under the outside tie-rod ballstud to keep the bump-steer the same. ~E. Stafford 
 |
||
| # ES 006 Steering Rack, X - 5 & XX4 | $19.99 |
|
Shocktower Brace "Not much to explain; I drew up these Carbon Fiber braces to bolt onto the XX4/X - 5 shocktowers and make sure your car finishes more races " ~E. Stafford  |
||
| # ES 004 Shock Tower Brace, XX4/X - 5, Rear | $14.99 |
|
Rear Shocktower Camberlink Brace "This little brace helps save rear shocktowers by resisting the torque effects on the ballstud areas of the rear shocktower. " ~E. Stafford  |
||
| # ES 003 Shocktower Camberlink Brace | $7.99 |
|
| Please note: shipping one item costs $7.50 US, $27.00 International. Maximum freight charges are $8.75 US, $31.50 International. |
||
